Wallboxes & mobile ev car chargers for the Mitsubishi Outlander PHEV

Are you looking for the best charging option for an Mitsubishi Outlander PHEV? Then you have come to the right place, because you don’t need a Mitsubishi wallbox to charge your car. There are many possibilities to charge your car and we help you to make the right choice, step by step.

The Mitsubishi Outlander PHEV needs a Yazaki type 1 plug and the car has a maximum AC charging capacity of 3.7 kW. This means that your car with a wallbox for at home will never charge faster than that. In addition, the car has an usable battery capacity of 13.8 kWh.

Of course, it is also possible that you do not want to use a wallbox but a mobile wallbox, which is why you will find all the important charging information about the Mitsubishi Outlander PHEV here.

* = Charging speed limited by vehicle

EV Charging cable for Mitsubishi Outlander PHEV

The Mitsubishi Outlander PHEV has a Yazaki connection, so it requires a type 1 ev charging cable. The car has a 1-phase 3.7 kW charging capacity. It is therefore possible to use both a phase 3 and phase 1 ev charging cable, because a heavier cable has no influence on the charging capacity.

View all charging cables for the Mitsubishi Outlander PHEV here

Wallbox for Mitsubishi Outlander PHEV

The electric Mitsubishi Outlander PHEV has a maximum charging power of 3.7 kW with an usable battery capacity of 13.8 kWh. This means that charging via a wallbox can be useful. A number of things could be important to keep in mind. A wallbox with a heavier charging capacity will not charge more than the maximum load capacity of your car, but it can't hurt either. Wallboxes have 4 charging capacities, provided that these cannot be adjusted yourself:

For your Nissan e-NV200 Evalia you need to have a Type 1 mobile wallbox. Of course, charging at home via the socket is less fast, but it can certainly be sufficient for hybrid or electric cars with a smaller battery. A mobile wallbox can usually charge 2.3 or 3.7 kW  (10 or 16A). Due to the high battery capacity of the Nissan e-NV200 Evalia, we advise you to use a mobile wallbox mainly as a backup or as an emergency solution.

EV Chargers have 4 charging capacities, provided that these cannot be adjusted yourself:

3.7 kW wallbox (1 phase of 16A): will charge a maximum of 3.7 kW for this car.
7.4 kW wallbox (1 phase of 32A): will charge a maximum of 3.7 kW for this car.
11 kW wallbox (3 phases of 16A): will charge a maximum of 3.7 kW for this car.
22 kW wallbox (3 phases of 32A): will charge a maximum of 3.7 kW for this car.

Fuse box connection for the wallbox
The choice of the best wallbox for your Mitsubishi Outlander PHEV in this case does not depend on your fuse box. Almost every fuse box can handle the power of 16A / 3.7 kW, even if you still have a 1 phase connection. Keep in mind that sometimes there may not be enough space and the fuse box may need to be expanded. What may be wise to consider is an 11 kW wallbox of 3 phases if you already have a fuse box with a 3 phase connection. With such a wallbox you are immediately prepared for the future, because most fully electric cars have a charging capacity of 11 kW for which a 3 phase connection is required. If you expect a fully electric car in the future, then a wallbox with a 3.7 kW charging capacity will probably have too low a charging capacity. But keep in mind that the type 1 plug is hardly used for new electric cars so. Our advice is to take a wallbox with socket so you can use it for other cars too.

View all EV Chargers for the Mitsubishi Outlander PHEV here

Mobile wallbox for Mitsubishi Outlander PHEV

With a mobile wallbox (also called portable ev charger), you can charge your hybrid or electric car through a normal socket at home. So do the Mitsubishi Outlander PHEV. Sockets at home have a power of about 220 volt, depending on your country. A mobile wallbox is equipped in such a way that it can be connected to that power grid. Often, charging at home via the socket is less fast, but for this battery capacity and charging speed, the difference is not very big. The most economical solution for the Mitsubishi Outlander PHEV and still use the maximum charging capacity is therefore the mobile wallbox.

A mobile wallbox can usually charge 2.3 or 3.7 kW  (10 or 16A), so you can also charge the car just as fast via a mobile wallbox. Make sure that you take into account the rest of the power consumption on the same group. 16A is more power than usual in your household consumed by a device, this can have nasty consequences. Also, you cannot put the portable ev charger on every extension cord, we also have special extension cables for that.  

View all Mobile Chargers for Mitsubishi Outlander PHEV here

Do you still have questions? Please feel free to contact us.