Besen EV charger

Filters
9 ProductsPage 1 of 1
Besen Besen 11 kW - type 2 - 6M - EV Charger
-20%WD's best choice
Besen 11 kW - type 2 - 6M - EV Charger
€499,- €399,-
Besen Besen 11 kW - type 2 - socket - EV Charger
-11%WD's best choice
Besen Besen 22 kW - type 2 - 6M - EV Charger
-18%
Besen 22 kW - type 2 - 6M - EV Charger
€575,- €469,-
Besen Besen 22 kW - type 2 socket - EV Charger
-20%
Besen Standing pole for Besen wallbox
40%
Standing pole for Besen wallbox
€199,- €279,-
Besen Besen plug holder for type 2 plug
-17%
Besen plug holder for type 2 plug
€29,95 €24,95
Besen Besen Pro 11 kW - type 2 - 5M - EV Charger
-13%Best priced with dyn. load balancing

Besen wallbox - Why a good choice?

Besen has started producing various Besen charging stations in China since 2012. They have their own factory here, which is capable of producing 2,000 charging stations every day. In total, the Besen company has over 300 employees in China.

Wallbox Discounter is the official supplier of the Besen charging station within Europe.

Besen offers enormously safe and innovative charging stations in its range. Because as an official supplier, we are in direct contact with Besen's technical department, we can promise you as a customer the following things:

  • The products are delivered new.
  • The products are delivered at the lowest price.
  • We offer the best service.
  • We offer the best warranty.

In addition to the above points, the Besen International Group has been active in the EV Chargers and Besen charging stations market for more than 12 years. This experience is reflected in the quality of the Besen charge post, as are the various CE and TUV certifications.

Summing up why people often choose this brand of charging station.

  • Well-waterproof
  • Sleek design
  • Plug & Charge

Popular models of Besen EV chargers

Besen offers one of the widest ranges within the charge post market. Below, we will highlight all Besen charge posts within our range and also explain how to install and use a Besen charge post.

From the Besen brand, we offer a wide range of Besen charge posts, namely:

 

 Besen 22 kW

 Besen 11kW socket

 Besen 22 kW 6M

-          Besen 11 kW - type 2 - 6M – wallbox

 Besen 11 kW 6M

Installation of a Besen charging station

In order to give you the best possible idea of how to install a Besen charging station, we will describe the installation of the charging station according to the installation manual. The contents of the Besen Wallbox are as follows:

inhoud besen

Drilling holes and placing screws

First, take the reference paper. Place it on the wall where you want to attach the Besen. The reference paper indicates exactly where to drill the holes.

Once the holes are drilled, you can insert 30mm screws into the holes with the hammer.

Place the back plate and hang up the charging station

Place the back plate on the wall with the 30mm screws. Then hang the charging station from this back plate. Make sure it is securely fastened.

Position the socket on the wall

Once the charging station is hanging properly on the wall, you can start securing the socket. This starts by removing the front cover in front of the socket. Next, screw the socket to the wall with the 95mm screws and then push the front cover back onto the socket. Make sure and check that the socket is securely fastened.

Wiring and finalisation

After hanging the socket, only the wiring remains to be connected. Make sure there is a proper power cable running from the meter box, so that the Besen is connected safely and properly. After connecting the cabling, the installation is complete.

Frequently asked questions

Which app for Besen charge point?

Some Besen charge stations are equipped with the EVSE Master app. On this app you can easily see the charging history of your Besen charge post, but you can also manually adjust the capacity of your Besen wallbox. This way, overloading the grid is prevented.

Does the Besen charging station have RFID?

Most Besen charging stations are indeed available with RFID authorisation. This option is often optional and therefore to be purchased separately.

How do I reset a Besen charge post?

To reset your Besen charge post, you can temporarily switch off the earth leakage circuit breaker. When it has been off for 10 minutes, you can turn it on again. The Besen should then restart.

How do I install a Besen charge post?

According to Besen's installation guide, the installation of a Besen charge post consists of 4 different steps, namely:

  • Drilling holes and inserting screws
  • Placing the back plate and hanging the charging station
  • Socket placed on the wall
  • Cabling and finalisation